●Smooth and beautiful surface, achieving mirror effect
●Wear-resistant, pressure-resistant, impact-resistant
●Resistant to water, alkali, salt and oil corrosion, good anti-corrosion performance
| color | Various |
| Mixing ratio | Main agent/curing agent = 5/1 (weight ratio) |
| solid,% | 90±2 |
| Painting times | 1 time |
| Dry film thickness, mm | 0.6~1.0 |
| Coating rate | Dosage: 0.90~1.0kg/ m2 |
| Actual value: It is related to many factors such as surface treatment, external environment, construction method, etc. | |
| Main technical indicators (implement GB/T22374-2008 floor coating material primer standard) | |
| Serial number | Test items | Technical indicators | Measured | Testing standards | |
| 1 | Color and appearance | Consistent color, smooth and even | qualified | Visual inspection | |
| 2 | Drying time, h | Touch Dry | ≤6 | 4 | GB/T 1728-1989 |
| Get down to business | ≤48 | twenty four | |||
| 3 | Bond strength, MPa | ≥2 | 10 | GB/T 16777-1997 | |
| 4 | Compressive strength, MPa | ≥70 | 70 | ASTM C579 | |
| 5 | Tensile strength, MPa | ≥9 | 9 | GB/T 16777-1997 | |
| 6 | Bending strength, MPa | ≥6.5 | 6.5 | ASTM C580 | |
| 7 | Washability times | ≥10000 | 10000 | GB/T9266-1988 | |
| 8 | Hardness (Shore Durometer, Type D) | ≥70 | 80 | GB/T6739-1996 | |
| 9 | Impact resistance (50cm.kg) | No cracks or peeling on the coating | 50 | GB/T1732-1993 | |
| 10 | Abrasion resistance (750g/500r) | ≤0.02 | 0.02 | GB/T1768 | |
| 11 | Water resistance (48h) | The paint film is complete, does not bubble or peel off, slight discoloration is allowed, and can be restored within 2 hours | qualified | GB/T1733-1993 | |
| 12 | Resistant to 20% NaOH, 72h | The paint film is complete, without blistering or peeling, and slight discoloration is allowed | qualified | GB/T 9274-1988 | |
| 13 | Resistant to 10% H 2 SO 4 ,48h | No bubbling, no shedding, slight discoloration allowed | qualified | GB/T9274-1988 | |
| 14 | Resistance to 3% NaCl, 168h | No bubbling, no shedding, slight discoloration is allowed | qualified | GB/T9274-1988 | |
| 15 | Oil resistance (120# gasoline), 72h | No bubbling, no shedding, slight discoloration allowed | qualified | GB/T1724-1933 | |
| 16 | Surface resistance, volume resistance, ohm | 1×10 6 ~1×10 9 | 106 | GB/T1410-1989 | |
● Old floors with paint
Completely grind away loose or incompatible old coatings to expose the concrete surface. Clean, dry and intact compatible coatings do not need to be removed.
● Oily floors
Oil stains will seriously affect the adhesion of floor coatings to the base surface. Oily floors must be completely cleaned and polished.
● New concrete floors
Make sure the floor has exceeded the maintenance period and the moisture content of the floor is less than 6%. It is critical to use mobile sandblasting tools and grinding equipment to treat the concrete surface to achieve the correct surface roughness.
Painting environment humidity range: Relative humidity is less than 75%.
Ventilation conditions: The paint system contains organic solvents, so the construction site should be ventilated and dust-free. However, there should be no strong wind to avoid dust from being brought in and affecting the appearance.
| Temperature(℃) | 5 | 10 | 25 | 30 |
| Mixing period (min) | 60 | 50 | 20 | 10 |
● Construction method
| Trowel | |
| Trowel | Choose a trowel with the appropriate tooth length according to the required coating thickness. For a coating with a thickness of 1mm, a trowel with a tooth length of 2mm is generally selected. It is important to use a needle-type exhaust roller to penetrate the coating during the construction process to avoid bubbles. |
● Thinner —
● Drying time and coating interval
| Temperature(℃) | 5 | 10 | 25 | 30 |
| Surface dry(hrs) | 12 | 10 | 4 | 3 |
| Working (hrs) | 72 | 48 | twenty four | twenty four |
| Minimum painting interval (hrs) | — | — | — | — |
| Maximum painting interval (days) | — | — | — | — |
● Painting matching
Applicable substrate Cement or concrete floor
Applicable coating Epoxy primer TA-1511 Epoxy midcoat TAF-1201
During transportation, the environment of the carriage should be dry and closed, the materials should be stacked stably, and the relevant regulations should be met.
● Avoid contact with skin and eyes.
● If paint comes into contact with skin, wash with warm water and/or an appropriate detergent. If paint comes into contact with eyes, rinse with plenty of water and seek medical attention immediately.
● Ensure good ventilation.
● Paint contains flammable substances. Please keep away from sparks and prohibit smoking in the vicinity.
● Comply with all health and safety regulations on site.